How to Fix Bluetooth Pairing Issue on iPhone 12

The Bluetooth connectivity issue on the iPhone 12 is worrying, so if you have an iPhone X or later that wants to connect wirelessly with your car, here are a few fixes.

The “iphone 12 bluetooth pairing issues” is a problem that has been present for a while. There are many possible solutions to this issue, but the most common one is to clear the cache of your Bluetooth device.

-Advertisements-

 

When it comes to smartphones, Bluetooth is one of the most important features. We utilize Bluetooth in our everyday lives, such as when driving and connecting it to our car. Bluetooth is amazing when it works, but it may be aggravating when it fails to couple devices. In this post, we’ll go through a few different techniques for resolving the Bluetooth Pairing Issue on iPhone 12.

A basic awareness of Bluetooth nomenclature and what the phrases represent in relation to the devices that utilize it is useful before you start troubleshooting. A Bluetooth device that appears for distant devices, such as your iPhone, is in “inquiring” mode. In “discoverable” mode, a gadget is waiting to be discovered, similar to a Bluetooth headset. The device is only expecting the iPhone to connect and share security information during this phase, which is known as “pairing.” It’s crucial to understand what these phrases signify since they’re often used in documents but aren’t always fully defined.

How to Fix a Bluetooth Pairing Problem on an iPhone 12

 

How-to-Fix-Bluetooth-Pairing-Issue-on-iPhone-12

12th Restart Your iPhone

For many cases, restarting or rebooting is the best remedy. It’s something that a typical user performs on a regular basis. Even if it is theoretically correct, when the system is restarted, all running programs are terminated, and the system is given a new start.

Despite the fact that most of you already know how to restart/reboot your iPhone 12, we’ve written out the correct procedure in case you’re confused:

  • Press and hold the side and volume down buttons at the same time.
  • When you see a ‘Slide to Power off’ bar, you may let go of the buttons.
  • To switch off your iPhone, move the bar to the left.
  • Now, wait a few seconds before pressing the side button to turn it on.

Bluetooth Connections Troubleshooting

Turn on/off Bluetooth.

The control center is the most convenient place to turn on Bluetooth. To turn Bluetooth on or off, follow the instructions below:

  • From the home screen, touch and swipe down to any location.
  • Now press and hold the Bluetooth logo until it becomes grey.
  • Now, hold your breath for a few minutes.
  • Finally, to turn Bluetooth on, repeat the procedures above.

Remove the device and connect it to the Bluetooth device.

  • From the home screen, open the Settings app.
  • After that, go to Bluetooth.
  • Check to see whether your Bluetooth device is still linked.
  • If you’re already connected, touch the I bubble.
  • To remove/unpair it, touch on ‘Forget This Device.’
  • Restart your device after that.
  • After resuming, repeat the steps above to access Bluetooth settings.
  • Then attempt to pair with the Bluetooth device.

Change the Bluetooth name on your iPhone

  • From the home screen, open the Settings app.
  • After that, go to General settings.
  • Now choose About from the drop-down menu.
  • Finally, tap in your name.
  • Rename it as well.

Toggle the Airplane Mode switch.

On your iPhone 12 series devices, you may also utilize Airplane mode to address any small Bluetooth issues.

  • From the home screen, touch and swipe down to any location.
  • Now, hold your finger on the Airplane logo until it becomes blue.
  • Now, hold your breath for a few minutes.
  • Finally, to turn Airplane off, repeat the procedures above.

Reset Network Configuration

If the previous approaches don’t work for you, there’s a good chance you’re having problems with your system settings. We’ll use this approach to restore all of the system’s default settings. To do so, carefully follow the procedures below:

  • From the app drawer, open the Settings app.
  • After that, go to General Settings.
  • Scroll to the bottom of the page and pick the Reset option.
  • The reset box will appear; now, touch on the first option, ‘Reset All Settings.’
  • After that, you’ll be asked to enter your passcode.
  • After successfully entering the passcode, a confirmation screen with the options ‘Cancel’ and’Reset’ will display.
  • You may now proceed by pressing the Reset button.

Update to the most recent iOS version

If none of the preceding techniques worked, your iPhone’s operating system may not be up to date. To fix the problem, upgrade the iPhone to the most recent iOS version. To update, follow the procedures listed below:

  • From the home screen, open the Settings app.
  • After that, go to General Settings.
  • Now choose Software Update from the drop-down menu.
  • If an update is available, install it on your iPhone by following the onscreen instructions.

Reset the factory settings

  • From the app drawer, open the Settings app.
  • After that, go to General settings.
  • Scroll to the bottom of the page and pick the Reset option.
  • The reset box will appear; now, tap on the ‘Erase All Content and Settings’ option.
  • After that, you’ll be asked to enter your passcode.
  • Finally, to complete the factory reset, follow the on-screen instructions.

Visit Apple Care for more information.

¬†If a factory reset doesn’t work, take your device to an Apple Store or Service Center to have it examined by a skilled technician. They may send it in for repair or replacement if necessary.

Conclusion

That’s all there is to it; you’ve now figured out how to fix the Bluetooth pairing issue on iPhone 12. If you are having any other problems or want further assistance, please visit our dedicated Apple iPhone 12 Troubleshooting Guide, where we have a large range of lessons and troubleshooting guides.

We hope you enjoyed and found the information beneficial. If your loved ones need it, feel free to send it to them. If you have any more questions, please leave a comment below and we would be pleased to assist you.

Peace ūüėČ


 

The “Bluetooth pairing issue on iPhone 12” is a problem that has been present for a while. There are many solutions to fix the issue, but the most common one is to restart your iPhone. Reference: iphone 12 bluetooth issues reddit.

Frequently Asked Questions

Why is my iPhone 12 not picking up Bluetooth devices?

A: Its possible that your Bluetooth device may be too far away to connect with other devices. This is because the range of most Bluetooth connections are limited, and during this time your iPhone cant detect it or it isnt in range.

How do I put my iPhone 12 in pairing mode?

A: To pair your iPhone 12, hold down the power button and home button simultaneously for 10 seconds. If you do not see a blue light to indicate that it has paired successfully, try repeating this process once more before trying to reconnect again.

How do I fix the Bluetooth pairing problem?

A: If you are having trouble with the bluetooth pairing, try to restart your system. This is the easiest way to fix any Bluetooth problems that you may be experiencing.

Related Tags

  • iphone 12 bluetooth issues 2021
  • iphone 12 bluetooth issues car
  • iphone 12 bluetooth stuttering
  • iphone 11 bluetooth not discovering devices
  • bluetooth troubleshooting